BTXGM - METEX S 1702, 10192

  • MSDS: BTXGM
  • Manufacturer: MACDERMID INC
  • Product Name: METEX S 1702, 10192
  • National Stock Number: 6850-00N045475
Product Identification

Product ID:METEX S 1702, 10192
MSDS Date:05/20/1987
FSC:6850
NIIN:00N045475
MSDS Number: BTXGM

Responsible Party
MACDERMID INC
245 FREIGHT ST
WATERBURY, CT 06702
US

Emergency Phone: 203-575-5700

Info Phone: 203-575-5700

Cage: MACDE

Contractor
MACDERMID INC.(FRMLY ALLIED-KELITE)
WATERBURY, CT 06702 US

Telephone: 203-575-5606/800-424-9300(CHEMTREC)

Cage: 0PX54

Ingredients

SILICIC ACID (H2SIO3), DISODIUM SALT; (SODIUM METASILICATE)

CAS: 6834-92-0

RTECS: VV9275000

Fraction By Weight: <35%

OSHA PEL N/K

ACGIH TLV: 2 MG/M3 (MFR)

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:CAN IRRITATE AND BURN EYES, SKIN AND
MUCOUS MEMBRANES.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYES: FLUSH WITH WATER FOR AT LEAST 15 MINUTES. CONTACT MD.
SKIN: FLUSH WITH WATER. INGESTION: DO NOT INDUCE VOMITING. DRINK
MILK OR WATER. CONTACT MD. INHALATION: REMOVE TO FRESH AIR.

Fire Fighting

Flash Point:NON FLAMMABLE
Extinguishing Media:AS FOR SURROUNDING MATERIALS.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .

Accidental Release

Spill Release Procedures:SCOOP MATERIAL WITH STEEL SHOVEL. FLUSH
REMAINING MATERIAL TO DRAIN WITH WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE IN DRY AREA. KEEP AWAY FROM
ACIDS. STORE IN TIGHTLY CLOSED CONTAINERS.
Other Precautions:AVOID EYE/SKIN CONTACT.

Exposure Controls

Respiratory Protection:DUST RESPIRATOR - NIOSH/MSHA APPROVED.
Ventilation:LOCAL EXHAUST.
Protective Gloves:RUBBER GLOVES.
Eye Protection:ANSI APPVD CHEM WORK GOGG W/FULL(SUPDAT)
Other Protective Equipment:RUBBER APRON/BOOTS. ANSI APPVD EYE WASH &
DELUGE SHOWER .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EYE PROT:WORKERS GOGGLES . EYE PROT: LENGTH FACESHIELD .

Chemical Properties

HCC:T6
Solubility in Water:APPRECIABLE
Appearance and Odor:WHITE GRANULAR POWDER.

Stability

Stability Indicator/Materials to Avoid:YES
ACIDS.
Hazardous Decomposition Products:UNDER THERMAL CONDITIONS CARBON
DIOXIDE AND WATER.

Disposal

Waste Disposal Methods:NEUTRALIZE TO PH 6.0-8.0. CONSULT FEDERAL, STATE
AND LOCAL REGULATIONS FOR DISPOSAL PROCEDURES.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.